Schumann Generator manufacture Custom request 4 ( schumann generator manufacture - Eletechsup )

What are the costs if you also have the smaller antennas made in plexiglass (thick 1.5mm) housing? Also with indicator led. Isn't it a good idea to also protect the led against higher voltages e.g. with the help of a SMD7805 microchip? Then you can perhaps also make the Labyrint Chartres versions at the same time. And perhaps the flower of life is also popular within the interested target group of Schumann resonance generators.

Answer:

The 1.5MM thick acrylic shell is very fragile, so it is recommended to use a 2.0MM thickness.
2 Adding a 7805 chip will increase power consumption, and the audio signal will not exceed 5V, so there is no need to add a 7805 regulator.
3 The antenna with acrylic is not cost-effective, so it is recommended to add a 7.83HZ fixed frequency signal generator.

Question : 

OK, 2mm I understand that. I also understand that you don't need the 7805 chip if you connect it to a generator. If you can offer it, you can make a nice set of it. I do think the indicator LED is important. If you want, you can make a quote for the 150mm antenna with 2mm acrylic housing and indicator LED.

Answer :

1 15CM width
2 Labyrint Chartres versions
3 With LED indicator
4 2.5MM acrylic shell (2.0MM is only suitable for 10CM width, 15CM width requires 2.5MM, otherwise it is easy to damage)

Final products :