News

es32d26 FAQ

es32d26 I'm trying to use the rs485 option to send messages but I'm having problems with the pin assignments the documentation say that it's io1 IO3 and IO21 but I'm...

N229E01 FAQ

Trying to send commands to the relay N229E01 throughout usr-tcp232-e2/T2 Converter Non of the commands is working Double checked connection and replaced N229E01 Still no response Matlab code Matlab R2025a Answer :...

25IOB16 FAQ

25IOB16： Now I have a technical question: the instructions do not contain information in case of loss of connection (or in case of module freezing) with the main device! Let's...

AMDSG08 FAQ

Hello, I have a specific problem with your device AMDSG08. Sometimes some of 8 inputs are freezed and the input keeps last value and don't read the DS18B20 sensor anymore....

ES32C14 FAQ

ES32C14 Could you also send me the .json or .schdoc source file of the EasyEDA project, so I can edit it directly? If it is possible   please read manual...

DM56A04 FAQ

azman here from malaysia. i am looking a simple display unit that can work with mitsubishi compatible plc. current ly i am using fx2n. the unit will only need to display numbers.   few days back i bough a DM56A04. this is for testing purposes only. if it is work ok i plan to replace all my timer boards. in total i ve more than 50 units running. using plc gives me more flexibility in operations.   so i really need your help to provide some guideline on how to let the plc to display the numbers on the DM56A04. especially on the programming of plc. any example will be much appreciated.   you can contact me at the above email address or simply whatapp me directly   I would also like to help you solve this problem, but I am very sorry! Because we don't know how to write PLC code. But you can debug step by step: 1 Use USB to RS485 to debug DM56A04 through the serial port assistant on the computer 2 Use USB to RS485 to debug PLC and let PLC issue the same instructions 3 Use PLC to debug DM56A04 again