News

Schumann Generator manufacture Custom request 5...

That is why I want to upgrade most of the antennas, although I think it is a shame because the design and finish are perfect. Last time you mentioned a...

Schumann Generator manufacture Custom request 4...

What are the costs if you also have the smaller antennas made in plexiglass (thick 1.5mm) housing? Also with indicator led. Isn't it a good idea to also protect the...

SFWSC08 Schumann Generator manufacture Custom r...

 Question ：  * A challenge for you * It's the weekend, take it easy. Proposal for a new design of a second professional Schumann resonance generator - Antenna 25 inch - 8 antenna connections - Button to set frequency (like previous model). After the click, the memory number 0 to 9 appears and you can choose between done or continue. Every time you continue, you can set a new frequency and the memory number increases. - Button to set timer (number of seconds on - number of seconds off) - Lithium battery built-in charging = red, full = green, active is (flashing) white. - Lithium battery provided with black heat shrink tubing so that it looks neat that is attached to the printed circuit board with small tie-wraps. - Plexiglas housing 2.8mm   Operation Generator transmits set frequency from memory number 0 for the set time, then it stops for the set time. then the generator transmits the frequency of memory number 1 if it is entered, again for the set time etc. etc. I assume you are using a microcontroller (e.g. STM32)?   A question for a possible update in the future: Are you also able to make a carrier signal (AM = Amplitude modulation)? For example 100Khz with 100% carrier of 7.83Hz?   Request confirm : 1 Antenna 25CM. 2 8 antenna connections (8 audio output interfaces). 3 "- Button to set frequency (like previous model). After the click, the memory number 0 to 9 appears and you can choose between done or continue. Every time you continue, you can set a new frequency and the memory number increases." The specific operation method has changed. 4 - Button to set timer (number of seconds on - number of seconds off) 0 - 10000 5 - Lithium battery built-in charging = red, full = green, " 6 - Plexiglas housing 2.8mm" 7 Lithium battery provided with black heat shrink tubing so that it looks neat that is attached to the printed circuit board with small tie-wraps.”  ...

Schumann Generator manufacture Custom request 2...

Is it possible for you to develop two versions, based on the current design, but with a built-in battery. A charge indicator green, red. Preferably a lithium battery of 3.7 volts greater than or equal to 4000mAH see for example:  https://nl.aliexpress.com/item/1005006830840436.html   Answer :  The version with battery can also be customized, but there are several aspects to be changed. 1 The version with battery is more expensive, with...

SMFSB07 Schumann Generator manufacture Custom ...

Question : 1: Function smiliar with SMJAC03 2: larger antenna such as ANTSC03 3: Timer function : for very sensitive people 1 sec on, 9 sec off, for sensitive people 2 sec on, 8 sec off, for light sensitive people 5 sec on, 5 sec off. Non sensitive people continuously on . 4: apperance can chage to SMJAC03 case。 5： make 4 pcs 3.5mm extra antenna connector   Question： Do I understand that the timer works as follows, 1 = 1 on, 9 off. 5 = 5 on and 5 off, 3 = 3 on and 7 off?   Question :  How long is the timer? Answer :  The ON time and OFF time...

Schumann Generator Factory Custom request ( sc...

Dear manufacturer,   Through a dealer of yours I bought almost 100 Schumann generators, after my enthusiasm was aroused. I have seen miracles such as a toe of a client of...